Does Drywall Always Need To Be Removed After Flooding?
In a vast majority of cases, water damage restoration specialists will need to perform a flood cut to handle any damaged drywall. This involves removing a section of the drywall approximately 12 inches above the flood line. Since drywall is a porous material, it can be extremely damaged by flooding, essentially becoming a sponge. However, there are a small number of situations where experts in Las Vegas, Nevada can repair the wall without having to tear out the whole thing.
1. Minimal Water Damage
Extreme levels of water brought about by heavy rainfall or a burst pipe will necessitate a flood cut every time. If your situation involves a washing machine or dishwasher overflowing and causing a small amount of water to flood the floor, then you may not need to remove drywall. The easiest way to determine this on your own is to get a moisture meter and apply it to the affected wall. If the reading is over one percent, then you will need to remove the wall because it is too compromised.
2. Clean Water
Severe flooding can cause water to pick up sewage and other pieces of debris from your home’s septic tank and bring those materials inside your house. With that level of contamination, a flood cut is highly recommended. You do not want hazardous materials to go deep inside the porous materials of the drywall.
3. Lack of Insulation
Some walls in your home have insulation, while others do not. If water seeps through the walls and enters the insulation, then that material is typically beyond salvage and will need to be removed. Experts in Las Vegas, NV will need to take out the walls to get to the insulation. This prevents further mold growth. Without insulation, the team may remedy flooding damage by drilling holes in the walls to air out the other side.
Visit http://www.SERVPROnorthwestlasvegas.com for more information on storm damage.